一、 Main purpose
The microcomputer controlled four ball friction and wear testing machine mainly evaluates the bearing capacity of lubricants in the form of sliding friction under extremely high point contact pressure conditions. Including three indicators: maximum no bite load PB, sintering load PD, and comprehensive wear value ZMZ. This machine can also perform long-term wear resistance tests on lubricants and measure the friction coefficient.
二、 Main technical parameters
Serial Number | Project Name | Technical Indicators |
1 |
Test force range (stepless adjustable) |
60N-10kN |
2 |
Relative error of test force indication | Test force below 400N: ± 2N, above 400N: ± 1% |
3 |
Maintain the indication error of the test force for a long time |
±1%F.S |
4 |
Friction testing range |
0-300N |
5 |
Friction testing error |
±3% |
6 |
Spindle speed range (stepless adjustable) |
200-3000r/min |
7 |
Spindle speed error |
±10 r/min |
8 |
Temperature control range of friction pair | Room temperature -200 ℃ |
9 |
Temperature control error of friction pair |
±2℃ |
10 |
Test time control range | 1s-99 H |
11 |
Spindle speed control range | 1-9999999 rpm |
12 |
External dimensions |
1160mm×750mm×1640mm |
13 |
net weight | About 400kg |
14 |
Test steel balls |
φ12.7mm |
Jinan Yihua Tribology Testing Technology Co., Ltd
Address: Building 3, Liandong U Valley, Jingshi West Road (Yuqing Road), Changqing District, Jinan City
Tel: (+86-0531) 85556501 85556502 85556503 85556504
Fax: (+86-0531) 85556501
Email: jnyihua@126.com
Website: www.jnyihua.com