- Multifunctional Series
- Linear reciprocating series
- Low load series
- Ring block series
- End face series
- bearing series
- Gear series
- Oil Product Series
- High temperature series
- Low temperature series
- High temperature vacuum
- High speed series
- Fretting series
- Current-carrying series
- Rolling contact fatigue series
- Mechanical seal series
- Abrasion measurement
- Three-body wear series
- other
- Standard sample
0531-85556502
发布时间：2023-08-08 09:03:11
浏览量： 次
一、 Main purpose:
The multifunctional friction and wear testing machine can achieve friction simulation tests between different friction pairs under various conditions, such as changing temperature, load, speed, friction pair material, friction pair surface roughness, hardness, and changing lubrication status (no oil lubrication, drip oil lubrication, or immersion lubrication).
The multifunctional friction and wear testing machine can simulate sliding friction forms and has various friction pairs, such as pin disc friction pairs, end face friction pairs, ball disc friction pairs, etc. Can complete friction simulation experiments on points, lines, and surfaces. It can be used to evaluate the friction and wear performance of materials such as lubricants, metals, coatings, coatings, rubber, ceramics, etc.
The multifunctional friction and wear testing machine is suitable for various professional fields of tribology, and can meet the requirements of friction and wear testing for users in various industries such as petrochemicals, machinery, energy, metallurgy, aerospace, and other tribological research, such as developing and testing various high-end series of oil and grease products, as well as developing emerging materials and new processes.
二、 Main technical specifications and indicators
| Serial Number | Entry name | Technical Indicators |
|
1 |
Test force |
10～1000N |
|
1.1 |
Relative error of test force above 20% of the maximum test force |
≤±1％ |
|
1.2 |
Relative error of test force below 20% of maximum test force |
≤2N |
|
1.3 |
The loading and unloading test force is stable, without any impact or pulsation phenomenon |
|
|
1.4 |
Test force display resolution |
1N |
|
2 |
friction torque |
|
|
2.1 |
Maximum friction torque |
2500N.mm |
|
2.2 |
Starting from 10% of the maximum friction torque, the relative error of the friction torque indication |
≤±2% |
|
2.3 |
Friction torque display resolution |
1N.mm |
|
3 |
Spindle speed |
|
|
3.1 |
Range of spindle speed |
5~2000r/min |
|
3.2 |
Error when the spindle speed is above 100r/min |
≤±5r/min |
|
3.3 |
Error at 100r/min and below |
≤±1r/min |
|
4 |
Temperature control range |
room temperature-260℃ |
|
5 |
Keep it warm for 10 minutes, and its temperature change value |
≤±2℃ |
|
6 |
Time display and control range of the testing machine |
1～99999s或min |
|
7 |
Test machine speed display and control range |
999999999 |
|
8 |
Rated power of the host |
1kW |
|
9 |
Test machine length, width, and height |
about 665×300×630mm |
|
10 |
Testing machine weight |
about 200Kg |
Jinan Yihua Tribology Testing Technology Co., Ltd
Address: Building 3, Liandong u Valley, Jingshi West Road (Yuqing Road), Changqing District, Jinan City
Tel: (+86-0531) 85556501 85556502 85556503 85556504
Fax: (+86-0531) 85556501
Email: jnyihua@126.com
Website: www.jnyihua.com
