Classification
- Multifunctional Series
- Linear reciprocating series
- Low load series
- Ring block series
- End face series
- bearing series
- Gear series
- Oil Product Series
- High temperature series
- Low temperature series
- High temperature vacuum
- High speed series
- Fretting series
- Current-carrying series
- Rolling contact fatigue series
- Mechanical seal series
- Abrasion measurement
- Three-body wear series
- other
- Standard sample
Product Center
Learn More >
Contact Us
0531-85556502
MLW-10 type large stroke reciprocating friction and wear testing machine
发布时间：2023-10-23 09:00:31
浏览量： 次
一， Main uses and functions
The large stroke reciprocating friction and wear testing machine is mainly used to test the friction and wear properties of materials and surface coatings. The machine adopts weight loading, which can realize the test of different test force and different test frequency under the condition of large stroke reciprocating friction performance parameters. The software can display the test force, friction force, creep coefficient, vibration signal, temperature, time and so on. The curve and experimental report can be derived after the test is completed.
二, the main technical parameters
1, test force: 1 ~ 10kN
2, the relative error of the test force indication value: ≤± 1%
3, the test force indication error: ≤± 1% F.S
4, reciprocating transverse force: ≤5000N
5, reciprocating frequency: 0.3 ~ 3Hz
6, maximum reciprocating stroke: ≥315mm (different frequencies)
7, the test time control range: 1s ~ 9999min
8. Lower sample length: ≥ 350mm
9, the sample diameter: 100mm
10, test space and clamping: to meet the test needs
11. Motor power: 15kW
12, shutdown control mode: manual/automatic (time, test force, etc.)
13, the external size of the host (excluding the motor) : about 2650×1400×1600mm
