Classification
- Multifunctional Series
- Linear reciprocating series
- Low load series
- Ring block series
- End face series
- bearing series
- Gear series
- Oil Product Series
- High temperature series
- Low temperature series
- High temperature vacuum
- High speed series
- Fretting series
- Current-carrying series
- Rolling contact fatigue series
- Mechanical seal series
- Abrasion measurement
- Three-body wear series
- other
- Standard sample
Product Center
Learn More >
Contact Us
0531-85556502
Technical introduction of MLGS-300 dry sand wet sand abrasive wear testing machine
发布时间：2023-10-24 09:08:11
浏览量： 次
一. Main uses
Dry sand and wet sand wear testing machine can realize both ASTM G65 dry sand wear test and ASTM G105 wet sand wear test, and also meet the requirements of ASTM B611 and JB/T 7705-1995 standards. Dry and wet dual use, automatic loading, frequency conversion speed regulation, can carry out multi-condition abrasive wear.
二. Applicable standards
ASTM G65 Standard Test Method for Measuring Wear on Dry Sand Rubber Wheel Devices
ASTM G105 Standard Test Method for Wet Sand Rubber Wheel Wear Test
ASTM B611 Standard Test Method for Determination of High Stress Wear Resistance of Rigid Materials
JB-T 7705-1995 "Loose abrasive wear test method Rubber wheel method"
三. Main technical parameters
Load range: 3-300N
Loading mode: Automatic loading
Maximum speed: 500r/min
Maximum friction: 300N
Maximum duration: 999999r
Equipment size: L700mm x W600mm x H1450mm
Weight: 85Kg
Power supply: 220V, 16A, 50Hz
Dry sand and wet sand wear testing machine can realize both ASTM G65 dry sand wear test and ASTM G105 wet sand wear test, and also meet the requirements of ASTM B611 and JB/T 7705-1995 standards. Dry and wet dual use, automatic loading, frequency conversion speed regulation, can carry out multi-condition abrasive wear.
二. Applicable standards
ASTM G65 Standard Test Method for Measuring Wear on Dry Sand Rubber Wheel Devices
ASTM G105 Standard Test Method for Wet Sand Rubber Wheel Wear Test
ASTM B611 Standard Test Method for Determination of High Stress Wear Resistance of Rigid Materials
JB-T 7705-1995 "Loose abrasive wear test method Rubber wheel method"
三. Main technical parameters
Load range: 3-300N
Loading mode: Automatic loading
Maximum speed: 500r/min
Maximum friction: 300N
Maximum duration: 999999r
Equipment size: L700mm x W600mm x H1450mm
Weight: 85Kg
Power supply: 220V, 16A, 50Hz
