MGS diesel lubrication wear spot measurement system - Diesel oil

Classification

Multifunctional Series

Linear reciprocating series

High temperature series

Low temperature series

High temperature vacuum

High speed series

Fretting series

Current-carrying series

Rolling contact fatigue series

Mechanical seal series

Abrasion measurement

Three-body wear series

other

Standard sample

Product Center

Learn More >

0531-85556502

MGS diesel lubrication wear spot measurement system

发布时间：2023-10-24 08:59:26

浏览量：次

一. Main uses
The system uses an optical microscope and camera with the suppression of highly reflective light, as well as analytical measurement software, which can be used to clearly observe metal wear marks and detect the degree of metal wear. The system is equipped with metallographic microscope, high definition analog camera, image measurement management software. This measuring system can be used for NB/SH/T0765-2021 "Diesel lubrication Evaluation (High frequency reciprocating testing machine method)" and GB19147-2016 diesel lubrication wear spot measurement, computer acquisition of wear spot image, automatic measurement of wear spot size and save the data.
二. System composition and working principle
The measuring system mainly includes metallographic microscope, two-dimensional workbench, high definition camera, image measurement management software.

order number	Configure the name	ts
1	metallographic microscope	XJ-53C-I
2	Two-dimensional workbench	XJ-53C-I
3	High definition camera	PZ-300W
4	Image measurement management software	XJ-53C-I

Among them, the gold phase microscope includes the bottom plate, column, observation seat, photographic eyepiece, eyepiece, objective lens, lighting power supply, lighting blower, power cord and so on. The microscope is equipped with a separate imaging plane and connected to the electronic imaging system camera. The camera is installed and connected to the computer. The x and y distances can be automatically measured through the image measurement software, with a magnification of 100 times and an accuracy of 1 micron.
3. Main technical parameters
3.1 objective parameters

class	optical system	amplified factor	numerical aperture (N.A.)	Working distance (mm)	Conjugate distance (mm)
Flat-field achromatic objective lens	dry	4×	0.1	13.8	195
	dry	10×	0.25	11.2	195
	dry	40×(S)	0.65	0.62	195
	dry	63×(S)	0.85	0.2	195

3.2 eyepiece parameters

class	amplified factor	Line field of view (mm)
Flat field eye mirror	10×	Φ 18
Flat field eye mirror	16×	Φ 11

3.3 Total magnification rate

	4×	10×	40×	63×
10×	40×	100×	400×	630×
16×	64×	160×	640×	1008×

3.4 Coaxial coarse micro-moving focusing mechanism
Coarse adjustment stroke: 40mm
Adjustment precision of micro-operation wheel: 0.002mm
3.5 Lighting light source
Input: 100V ~240V wide voltage
output:6V20W
Bulb type: Halogen lamp