Classification
- Multifunctional Series
- Linear reciprocating series
- Low load series
- Ring block series
- End face series
- bearing series
- Gear series
- Oil Product Series
- High temperature series
- Low temperature series
- High temperature vacuum
- High speed series
- Fretting series
- Current-carrying series
- Rolling contact fatigue series
- Mechanical seal series
- Abrasion measurement
- Three-body wear series
- other
- Standard sample
Product Center
Learn More >
Contact Us
0531-85556502
MLD-10 dynamic load abrasive wear testing machine
发布时间：2023-10-24 09:17:44
浏览量： 次
一. Main uses
This testing machine is a multi-functional testing machine that can simulate a variety of working conditions. It can be used for the wear resistance test of metal materials and various dry and wet abrasives under the condition of impact load or no impact load, contact or no contact, sliding or rolling friction. The wear of metal materials under different loads and different interactions, and the experimental study of the wear mechanism. The testing machine can be used in metallurgy, mining, cement, building materials, transportation, electric power, agricultural machinery and other scientific research institutions, colleges and universities and design departments to study the wear and wear mechanism of metal materials, reasonable selection of metal materials, but also to meet the needs of machine manufacturers, metallurgical repair factories and other factories laboratory production inspection.
二, the main technical parameters
1. Impact power: 0 ~ 5 joules
2. Punch weight: 100 Newton
3. Number of shocks: 50, 100, 150, 200 times/minute
4. Weight free fall height: 0 ~ 50 mm
5. Shaft speed of the lower sample: 200 RPM
6. Abrasive particle size: 0.1 ~ 4mm
7. Abrasive flow rate: 0 ~ 50 kg/hour
8. Motor: Y2-100L-6
9. Overall dimensions :(length × height × width)980×440×1500 mm
10. Weight: about 500 kg
