Classification
- Multifunctional Series
- Linear reciprocating series
- Low load series
- Ring block series
- End face series
- bearing series
- Gear series
- Oil Product Series
- High temperature series
- Low temperature series
- High temperature vacuum
- High speed series
- Fretting series
- Current-carrying series
- Rolling contact fatigue series
- Mechanical seal series
- Abrasion measurement
- Three-body wear series
- other
- Standard sample
Product Center
Learn More >
Contact Us
0531-85556502
ML-100 abrasive wear testing machine
发布时间：2023-10-24 09:15:41
浏览量： 次
一. Main uses
The testing machine is a dry fixed abrasive wear testing machine. It is mainly used for abrasion resistance test of metal materials under the condition of friction of sand, ore, sand and other solids. Through the test, the abrasive wear resistance of various metal materials is obtained, and the abrasive wear mechanism can be studied. So that engaged in mining machinery, construction machinery, transportation machinery, agricultural machinery and other design, production and scientific research departments to choose reasonable metal materials and processes.
二.the main technical parameters
1, type: pin disk type, rotary abrasive wear testing machine
2. Maximum load: 100 Newton
3, load range: 2-100 Newton 1 Newton per stage
4, disc speed: 60, 120 RPM
5, sample feed rate: 1, 2, 3, 4 mm/RPM
6, sample diameter: 2, 3, 4 mm
7, two-speed motor: (1) 380V 50 weeks/second
(2) the speed of 690, 1380 revolutions per minute
(3) the power of 0.45, 0.84 kw
8, appearance size: (length × width × height) 560×540×1015 mm
9. Weight: about 350KG
